X860 M.2 NGFF 2280/2260/2242/2230 SATA SSD NAS Storage Expansion Board with USB 3.0 Jumper for Raspberry Pi

Spedizione da magazzino Europeo

nessuna tassa doganale è richiesta per le spedizioni nel mercato UE

Country:

Metodo di spedizione: Italy

Magazzino : Italy

Italy: Metodo di spedizione
Shipping Direct mail 1-3 weeks (Tracked) EUR 4,50

Cod.: BG-1472539

€45,11

Metodo di spedizione

Quantità:

i h

electronicspageprodcampain

Overview:

The new member of the Raspberry Pi storage expansion board family - X860 (M.2 NGFF SATA 2280/2260/2242/2230 ) is coming. 2280/2260/2242/2230

Features:

- Ideal storage solution for Raspberry Pi - M.2 NGFF SATA SSD Shield
- Supports up to 2TB m.2 NGFF SSD solid-state drive
- Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230
- Supports operating system installation and booting from your SSD
- Supports faster OS image writing (>300Mb/S*) from a PC or a Mac
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
- USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
- Quick file transfer with high-speed USB3.0 5Gb/s connectivity from a PC or a Mac
- USB bus-powered
- LED blue indicator indicates drive status
- Specially-made USB3.0 connector to connect with Raspberry Pi - no additional cables needed
- On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 6.6Watts)
- Fully compatible with X720, X730 and X735 for intelligent and safe power management
- PCB Size: 87mm x 56mm

Note:

- *The Raspberry Pi main board is not included.
- USB3.1 Gen 1 port, SSD sequential write speed >300MB/s
- NGFF SATA SSD is not included
- Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
- As with all SSDs, new media must be formatted before use
- Performance depends on host system, workload, and SSD media used
- SSDs use exceptionally high performance storage media that will run hot when under load
- Older SSD drives with less efficient flash media may not perform as well as newer drives
- We only test it on Raspberry pi, not test on the Rock64; But in fact, Rock64 can fully play the performance of USB3 since Rock64 with USB 3.0;

Power supply request:

5Vdc +/-5% , Powered by Raspberry Pi
Additional power supply for SSD (Only when you find that the power supply of the SSD is insufficient)
5Vdc via on-board micro-USB or XH2.5 2Pin connector

Ports & Connectors:

- USB socket - USB 3.0 type A x 1
- Micro-USB SSD power socket x 1
- XH2.54 SSD power input port x 1
- 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x 1

Click for more info

Package included:

1 x X860 Board
1 x USB3.0 Connector
1 x USB 3.0 A-Male to A-Male Data cable(about 60cm)
1 x Screws Pack

Etichetta del prodotto

For (4380)
,
Board (1220)
,
With (1599)
,
USB (573)
,
Raspberry (214)
,
Expansion (123)
,
Storage (252)
,
Pi (253)
,
Jumper (41)
,
SATA (9)
,
3.0 (25)
,
NAS (2)
,
SSD (2)
,
X860 (1)
,
M.2 (1)
,
NGFF (1)
,
2280/2260/2242/2230 (1)

X860 M.2 NGFF 2280/2260/2242/2230 SATA SSD NAS Storage Expansion Board with USB 3.0 Jumper for Raspberry Pi

electronicspageprodcampain

Payment options