Menu
Cerca
Euro
Italian
Cerca Close
Shopping cart Close

Non ci sono articoli nel tuo carrello

All Categories
    Menu Close
    • Home /
    • Electronics /
    • NVIDIA Jetson Nano 2.5 inch SATA SSD/HDD Shield Storage Expansion Board USB 3.1 T300 V1.0 for NVIDIA Jetson Nano Developer Kit

    NVIDIA Jetson Nano 2.5 inch SATA SSD/HDD Shield Storage Expansion Board USB 3.1 T300 V1.0 for NVIDIA Jetson Nano Developer Kit

    Venditore: Serier Electronics

    Spedizione da magazzino Europeo

    nessuna tassa doganale è richiesta per le spedizioni nel mercato UE




    Cod.: BG-1519036
    €44,09




    i h

    electronicspageprodcampain

    • Module Board For Arduino
    Loading...
    Overview:
     
    This is an expansion board designed specifically for NVIDIA Jetson nano developer kit that supports up to 4TB 2.5-inch SSD/hard drives by Geekworm and Suptronics, it allowing you to expand your storage with high-speed SSD drives on NVIDIA Jetson nano developer kit.
     
    ITEMDESCRIPTION
    FOR USE WITHJetson Nano
    OPERATING SYSTEMAll operating systems
    KEY FEATURES· Ideal storage solution for Jetson Nano - 2.5" SATA HDD/SSD Shield
    · Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD)
    · USB 3.1 Gen1 to SATA 6Gb/s bridge controller
    · USB 3.1 Gen1 connectivity offers plug-and-play functionality on your Jetson Nano
    · Quick file transfer with high-speed USB3.1 Gen1 connectivity  from a PC or a Mac
    · Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed
    · On-board DC power jack allows to provide enough power to HDD/SSD
    · Intelligent power management - Automatic powering off when system shutdown
    · With 1 Female to 2 Male DC cable supplied to power both T300 and Jetson Nano
    · USB bus-powered or powered by external power adapter
    · LED blue indicator indicates drive status
    POWER SUPPLY· Power supply via DC jack :  5VDC ±5%.
    · A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down.THIS IS VERY IMPORTANT!!
    I/O PORTS· USB Type-A socket x 1
    · DC Jack  5.5x2.1mm x 1
    · 22Pin SATA socket x 1
    DIMENSIONPCB Size: 123mm x 79mm

    Package inlcudes:
     
    1 x T300 V1.0 2.5 inch SATA SSD/HDD Shield
    1 x USB 3.0 Bridge
    1 x 1 Female to 2 Male DC cable (length: 15cm)
    1 x Installaton screw pack

    There are 3 power supply methods:
     
    1. Directly power the motherboard is acceptable if use a good quality DC 5V 4A power adapter. (otherwise, the current is not enough to 2.5 inch SATA SSD)
    2. Power the jetson nano and T300 with 1 female to 2 male DC cable, require a good quality DC 5V 4A power supply, otherwise, jetson nano will be automatically shut down.
    3. Can power the T300 separately, but will lose the power management function.

     





    For reference only:












    Etichetta del prodotto
    Informazioni
    Profilo
    Servizio Clienti

    Payment options

    Serier® s.r.l. Via G.Marcomi 6 Offanengo 26010 (CR) p.iva : 01704390192    Powered by nopCommerce
    Copyright © 2024 Prodotti Italiani Elettronica. Tutti i diritti riservati