Features:
Compact and lightweight design, convenient to carry
Adopt environmental protection ABS material without any odor
It is a tough, water-resistant polycarbonate case made to carry and store memory cards
Convex design on the case makes card media case more ergonomic and more comfortable
The case adopts a compact design, the two compartments both allow you store 1Standard SIM + 2Micro-SIM + 2Nano-SIM + 3CF + 7SD + 6TF + 1Card pin
The case with a micro USB 3.0 port, can as a card reader for reading TF / CF / SD card
With a 3 in 1 USB cable, USB 3.0 + micro USB 2.0 + Type-C to micro USB 3.0
The blue water-resistant TPV material seal keeps unwanted debris and water from entering the case
Notes:
This product's read card function only support the devices with OTG function, not support iOS apple iPhones
Part of the OTG devices need to open OTG in the smarphone setting manually
The OTG function not supports the card 64GB or more
How To Read Card:
Open positive the left side blue soft rubber seal
Open the card case, put the card in the card slot, then close the cover
Use the data cable to plug into the read card box tail USB port
Use the corresponding match data transmission port to connect the corresponding devices which support OTG protocol
Package Included:
1 x PULUZ Card Reader Memory Card Case (
The cards are not included)
1 x Card Pin
1 x 3 in 1 USB Cable: USB 3.0 + micro USB 2.0 + Type-C to micro USB 3.0
Specifications:| Material | ABS, PC, TPV |
| Storage Capacity | 1Standard SIM + 2Micro-SIM + 2Nano-SIM + 3CF + 7SD + 6TF (not included) |
| Functions | Card reader, storage box |
| Read Card | TF / CF / SD |
| USB Type | 3 |
| Cable Length | 40cm / 15.6Inch |
| Size | 11.5 x 7.0 x 2.05cm / 4.49 x 2.73 x 0.80Inch |
| Weight | 118g / 0.26lb |
![]()
![]()
![]()
![]()
